Imagine opening up and closing off different areas of your layout in an instant, with doors that are there when you need them, and slide into a pocket in the wall when you don’t. And because the doors slide into a pocket in the wall, the doors themselves do not take up valuable space in the room when they are open.
The Eclisse double sliding pocket door system can also be installed against an existing masonry wall by simply creating a false stud wall alongside the existing masonry one. All you need to do is to construct the frame in exactly the same way, still applying plasterboard to both sides of the frame for strength. By doing this you will only be adding 100mm thickness to the existing wall. This is nothing compared to the space you will save by installing pocket doors instead of traditional hinged doors!
What is FINISHED WALL THICKNESS? Click here for diagram.
|WHAT'S INCLUDED IN THIS KIT:|
|Galvanised steel frame||Strong galvanised steel frame. A quick-click frame that assembles into a complete unit comprising of two full pockets and a track.|
|Runners||Runners are tested to 100,000 cycles (that’s around 25 years of average use!)|
|Extractable Track||Track can be extracted without having to break into the wall. (See Tech Tips section in Technical tab for instructions).|
|Front and rear door stop||Can be adjusted to determine how far the door protrudes from the pocket.|
|Metal anti-warp door profile||Slots into a channel in underside of door. Not visible but ensures that if your door warps it continues to slide smoothly.|
|Self centering door guide||Clicks into frame, doesn't screw into the floor, so it is perfectly centred every time.|
|Fixings||Even the screws to attach the plasterboard to the frame are included.|
|Jamb kit||Comes complete with jamb kit made from finger jointed fir with cherry walnut veneer* that is unfinished and paint/stain ready. The jamb kit includes dustbrushes and recessed door post with integral bumpers for a professional finish. What is a jamb kit? View explanation and see parts list here.|
|Parts List with Images||View|
|BIAS® soft-close with anti-slam, BIAS® DS Bi-directional soft-close with anti-slam, double door coordination kit and also soft-close.|
|15 year guarantee on the complete Eclisse steel pocket system and runners.|
|When fitting flush pull handles we recommend the stop be regulated so the door protrudes from the pocket to avoid risk to fingers. Should the door be adjusted to enter the pocket completely we do not accept any liability.|
|DOOR PANEL WEIGHT:||100kg (150kg available on request)|
|BESPOKE SIZING AVAILABLE?:||Yes- Max door panel width 2026mmm; Max door panel height 2910mm|
|DOOR THICKNESS:||35 - 44mm|
|FINISHED WALL THICKNESS:||100 or 125mm|
|SYSTEM TYPE:||For use with timber doors|
|JAMB KIT SUPPLIED?:||Yes- the jamb kit made from finger jointed fir with cherry walnut veneer* that is unfinished and paint/stain ready.|
|DOOR SUPPLIED?:||No- you can use a standard UK or ROI door panel size (see Technical Spec)|
|SIZING CHART & TECHNICAL SPEC:||Download|
|INSTRUCTIONS:||Frame | Connector|
|CAD DRAWING (.dwg):||100mm finished wall thickness | 125mm finished wall thickness|
|1) Instructions on how to remove the door from an Eclisse Classic Pocket Door System - Download PDF.|
|2) Video on how to extract the track. View (NB. To access the track you will need to follow the instructions above on how remove the door first. You may also need to adjust the door stop to access one of the screws).|
* We reserve the right to supply jambs with an alternative wood/finish.