SINGLE FIRE-RATED Pocket Door System (Rev F)

£569.00 (Ex. VAT)
£682.80 (Inc. VAT)
Shipping:
Free Shipping
FD30 Single Pocket Door System - Revision F

The independently fire-tested and certified Eclisse Pocket Door System - Fire-Rated Single (FD30)

This sliding pocket door system includes all the benefits of the standard Eclisse Classic Pocket Door System plus a specially designed jamb/architrave kit made from a high-density slow burning hardwood.

Note: The frame is 75mm and requires one layer of 12.5mm Type F plasterboard either side to give a finished wall thickness of 100mm.

Refer to the report below for information on which non-essential hardware (i.e. push plates, kick plates, handles) has been approved for use. 

If you would like any further information regarding the FD30 pocket door systems, please contact the customer service team on 0333 5770828.

Download Field of Application Report PAR /10057/01 Revision F

 kiwa-300x106.png

PRICING & SIZING

  • Price: £569.00 + Vat for all standard sizes.
  • Not sure which size you need? Have a look at this SIZE CHART & TECHNICAL SPEC. Still have questions? Call our friendly Customer Services Team on 0333 5770828.
  • PLEASE NOTE INBUILT TOLERANCE - If setting out your studwork before delivery of your frame please note there is approximately an 8mm tolerance built into the height of these pocket door systems which you will need to take into account. Packers may be required to accommodate for this gap if you are unable to adjust the studwork above the system. Note: Frame should be installed at finished floor level.

DELIVERY

  • Order online before 1pm on a weekday for a next working day delivery to UK mainland. For delivery to islands, Highlands, N Ireland and ROI please contact us.
  • FREE delivery to UK mainland for this frame and jamb when ordered online.   For delivery to islands, Highlands, N Ireland and ROI please contact us.
  • FREE delivery to UK mainland for accessories and door furniture when ordered at the same time as this product.

ACCESSORIES

  • A fully approved  self-closing mechanism is available. Please check first with your Building Inspector prior to ordering to determine whether or not your particular application will require a self-closer. 
  • BIAS Soft-Close with Anti-Slam (optional)
  • Handles- refer to the IFC-Field of Application Report for information on installation.

 

  • Complete with specially designed jamb/architrave kit made from a high-density slow burning hardwood.
  • For use listed 44mm FD30 door panels (not supplied) under field of application report PAR /10057/01 Revision F
  • Maintenance-free track and runners.
  • Fully adjustable front and rear doorstop. 
  • Runners are tested to 100,000 cycles (that’s around 25 years of average use!) 
  • Anti-warp door profile
  • Self-centering floor guide
  • 15 year guarantee on the complete Eclisse steel pocket system and runners
  • Fully tested and approved by International Fire Consultants PAR/10057/01 Revision F
  • TECHNICAL SPEC: Download
  • Bespoke sizes - please contact us for details
  • Max door panel weight: Up to 100Kg (unless fitting the Eclisse self-closing device for single pocket doors then the maximum door weight is 40kg).
  • Channels routed out in jambs to accept standard 15 x 4mm graphite based intumescent seals (supplied).
  • Finished Wall Thickness: 100mm
  • Designed for use with 12.5 mm Type F plasterboard (not supplied).
  • Install at finished floor level.
  • INSTALLATION INSTRUCTIONS: Assembling frame | Installing Jambs | Self-Closer
  • NBS Spec: Download
  • BIM: Download
  • CAD: Download

Need more information? Just give us a call on 0333 5770828.

 

Related Products

Enter your email address below to subscribe to our monthly newsletter.

MailChimp Signup Link