Classic DOUBLE FIRE-RATED Pocket Door System (Discontinued - For Reference Only)

If you have any queries please contact Customer Service for more information 0333 5770828

Free Shipping
ECLISSE Classic DOUBLE FIRE-RATED Pocket Door System- FD30

Note this product has now been replaced by our NEW Double Fire-Rated Pocket Door System with new FD30 certification.

The information here is for reference for those customers who purchased our previous fire-rated pocket door systems up to the end of May 2023,  that was covered by field of application report PAR/10057/01 Revision C.

If building control sign off is required and has not yet been obtained, customers should satisfy themselves that their building control inspector will accept this field of application report, with a proof of purchase date and this Letter of Comfort which extends the date for installation and sign off, where required, to the end of November 2023


The independently fire-tested and certified ECLISSE Pocket Door System - Fire-Rated Double (FD30). Compatible and certified for use with the BIAS Soft-Close Anti-Slam

The ECLISSE Classic Double Fire-rated Pocket Door System uses our high quality, comprehensively tested pocket door frame with specially designed high density  fire-resisting jambs and architrave.

Note: The frame is 70mm and requires two layers of 12.5mm fireboard either side to give a finished wall thickness of 120mm.

This system comes supplied with  all the necessary intumescent strips required for installation. 

Before ordering please refer to the Field of Application Report and your Building Inspector with respect to whether installation of the fully approved self-closing mechanism is required for your application.

Refer to the report below for information on which non-essential hardware (i.e. push plates, kick plates, surface mounted pull handles, recessed pull handles) has been approved for use.

Download IFC- Field of Application Report/Fire Certificate.




  • Order online before 1pm on a weekday for a next working day delivery for UK mainland.
  • FREE delivery to UK mainland for this frame and jamb and any accessories or door furniture that is included in the same order.   For delivery to islands, Highlands, N Ireland and ROI please contact us.


Galvanised steel frame Strong galvanised steel frame.  A quick-click frame that assembles into a complete unit comprising of full pocket, track and doorpost.
Runners Runners are tested to 100,000 cycles (that’s around 25 years of average use!) 
Extractable Track Track can be extracted without having to break into the wall. 
Front and rear door stop Can be adjusted to determine how far the door protrudes from the pocket. 
Metal anti-warp door profile                      Slots into a channel in underside of door. Not visible but ensures that if your door warps it continues to slide smoothly.
Self centering door guide Clicks into frame, doesn't screw into the floor, so it is perfectly centred every time.
Fixings Even the screws to attach the plasterboard to the frame are included.
Jamb kit

The jambs with integrated architrave are manufactured from high density finger jointed oak. The wood is unfinished and paint/stain ready.

Intumescent strips Intumescent strips are required to be fitted to the jambs and to the meeting stiles of the doors. All the intumescents required are supplied.
  44mm FD30 Door and 12.5mm fireboard not included. 
BIAS® soft-close with anti-slam (2 required if chosen); Back of the door self-closer [AUTSAP2] (2 needed if required)
15 year guarantee on the complete Eclisse steel pocket system and runners.
  • This FD30 Pocket Door System has been fully tested in the UK by EXOVA Ltd, a laboratory based testing company, and certified by International Fire Consultants Group Ltd to BS476: Part 22:1987. Field of Application Report no. PAR/10057/01 Revision B.
  • Important: Install at finished floor level.
  • Before ordering please refer to the Field of Application Report and your Building Inspector with respect to whether installation of the self-closing mechanism is required for your application. Note: if the self-closing mechanism is required you will need to purchase 2x back of the door self-closers (AUTSAP2).
FINISHED WALL THICKNESS:       120mm (frame size 70mm with 2 layers of 12.5mm fireboard required either side)
SYSTEM TYPE: For use with 44mm FD30 timber doors
JAMB KIT SUPPLIED?: Yes- the jamb kit with integrated architrave is made from finger jointed oak that is unfinished and paint/stain ready.
DOOR SUPPLIED?: No- you can use a standard UK 44mm door panel size (see Technical Spec)
INSTRUCTIONS: Frame | Jamb Installation | Self-Closer Installation
CAD DRAWING (.dwg): Download
NBS SPEC: Download
BIM: -
Need more information? Just give us a call on 0333 5770828.


Related Products

Enter your email address below to subscribe to our monthly newsletter.

MailChimp Signup Link